How to Install a Proxmark3 Driver on Windows 10
Follow the instructions below to install the Proxmark3 CDC drivers on a computer running Windows 10.
Upgrading your Proxmark3 to V3.0.1
These instructions describe the process of upgrading your Proxmark3 to firmware V3.0.1 on Linux, Windows, and macOS (OS X).
Getting Started with MagSpoof R3 firmware on macOS
Follow this step by step guide to get started using the MagSpoof R3 firmware on macOS.
MagSpoof R3 on GitHub
Hardware and software sources for the MagSpoof R3 are now available at https://github.com/RyscCorp/magspoof_r3.
Getting Started with MagSpoof using Arduino IDE
This guide covers the process of getting started with the MagSpoof using Arduino IDE.
MagSpoof R3 - Now Available
We are pleased to announce that the MagSpoof V2 is now available for pre-order. Orders yours today.
Identifying unknown tags using the ChameleonMini Rev.G
Follow these steps to identify an unknown HF tag (13.56 MHz) with the ChameleonMini Rev.G.
Reading Tags with the ChameleonMini Rev.G
Follow these steps to read a HF tag (13.56 MHz) with the ChameleonMini Rev.G.
Getting Started with version 2.3.0 of the Proxmark3
Step by step instructions for getting started with the Proxmark3 Client V2.3.0 on Windows, Linux, and macOS (OS X).
Upgrading your Proxmark3 to V2.3.0
These instructions describe the process of upgrading your Proxmark3 to firmware V2.3.0 on Linux, Windows, and macOS (OS X).
ChameleonMini RevE-2 Read Range
Read range results for a ChameleonMini using a Proxmark3 HF Antenna and a ACR122U.